|
|
|
Getting
Started
Incoming Counter
<!--#include virtual="cgi-bin/sclite/in.cgi?domain.com"
--> just under <HEAD>.
Note: Replace domain.com by your own domain.
Lost Counter
<!--#include virtual="cgi-bin/sclite/lost.cgi?domain.com"
--> just over </BODY> in your html.
Note: Replace domain.com by your own domain.
Out Counter
Use as a link. Specifications must be in the URL.
Example: cgi-bin/sclite/out.cgi?l=teens1&g=1&u=http://www.gallerydomain.com/45634/Linda/blowjob_04.html
Codes: "l=" - Linkname. (Lower-case L)
"g="
- Group number.
"s="
- Skim percentage.
"c="
- Clicks to galleries before skimming.
"p="
- Permanent links. (MUST have an ID. Ex: p=11)
"r="
- Rotating clicks. (r=2 -> Gal,Gal,Trade,Gal,Gal,Trade,etc..)
"u="
- URL. (MUST be last in the query string)
"i="
- ID of the trade you want to send to. (MUST be last in the query
string)
Note: If "p=" is present, everything else is ignored.
If "r="
is present, "g=", "s=", and "c=" are
ignored. Group priorities are kept.
If "g="
is present, "s=" and "c=" are ignored.
Only ONE of
either "u=" or "i=" can be specified in 1 query
string.
If "c="
is present but "s=" is not, the surfer will always go
to the gallery.
Visit "Settings" and "Signup Form" to edit with
your info.
Administration Area
In - The number of incoming raw hits.
Uni - The number of incoming unique hits.
Lost - The percentage of traffic who did not let your site load
completely.
Total Clicks - The number of clicks generated by a trade.
Trade Clicks - The number of clicks that went to a trade.
Prod - The percentage of clicks based on hits in.
Trade Prod - The percentage of trade clicks based on hits in.
Raw Out - The number of outgoing raw hits to that trade.
Unique Out - The number of outgoing unique hits to that trade.
Return - The percentage of outgoing raws over incoming raws .
2nd%+ - The percentage of traffic sent that came back for more clicks.
Gain - The percentage relative to the trade clicks and traffic sent..
Skim - Skim percentage that trade received.
Force - The amount per hour over the hours left on force.
RED - Reset, Edit, Delete.
IP-RF-UA-CI-CO-GR - IP's, Referrers, User Agents, Countries In,
Countries Out, Graphs.
Blocked - Traffic matched to the blocked list. (excluded from total
stats)
NoReferrers - Traffic without a referer (usually a bookmarker).
NoCookies - Number of clicks by surfers with cookies disabled (useless
traffic).
Galleries - Number of hits sent to galleries.
Trades - Number of hits sent to trades.
Extra - Summary of the traffic NOT in your trades, blocked, or searchengines.
SearchEngines - Summary of the traffic matched to the search engines
list.
ExitURL - Number of clicks sent to the Exit URL specified in Settings.
Mass Editing - See "Add Trades" below.
Countries
Country - Name of the country.
Number of Hits - Number of hits in the last 24 hours.
Percentage of Total Traffic - Percentage the country represents
based on the total traffic.
Links
Stats based on link names you pass to out.cgi.
IP's, User Agents, Referers
Displays from the latest entry to the oldest based on the specifications
set.
IP's - Surfer's Internet Protocols.
User Agents - Surfer's browsers used while browsing your site.
Referrers - Surfer's specific referring urls to your site.
History
Daily Stats put into graphs and tables either in a monthly or yearly
manner.
Adding Trades
Power Trader - Ranks trades based on most important stats.
Disabled - Prevent the trades from receiving any traffic.
Hits In - Trade simply based on incoming hits.
Uniques In - Trade simply based on incoming uniques.
Clicks - Trade simply based on clicks.
Trade Clicks - Trade simply based on trade clicks.
% of Clicks - Trade based on the percentage of clicks generated
by the trade.
% of Hits In - Trade based on the percentage of incoming hits by
the trade.
Force Only - Always try to send the force specified and prevent
from being deactivated by the bouncer. Ideal for selling traffic.
Note: It is very recommended that you stick to 1 kind of trading
manner for all your trades to ensure perfect ranking.
Example: Power Trader manner will always be smaller than "Hits"
Trading because it is more complex which gives a smaller result.
Therefore, Power Trader trades would receive very little.
Signup Form
Edit Rules - HTML template that will show up on signup.cgi.
Defaults - The default settings of any trade that will signup.
Note: You can choose to start them out as disabled so you can review
or force immediately without review and so on.
Search Engines
List of search engine domains to show up in "searchengines"
stats of the main overview.
Blacklist, IP Blacklist
List of domains and IP's that you won't allow to signup automatically
via signup.cgi.
Blocked List
List of domains that you won't allow in stats other than blocked.
Note: Be careful! If you want to block "amateur-rape-videos.com"
by writing "amateur", it will block ANY domain containing
"amateur". Use wisely..
IP Scanner
Lists all IP's with repetitions greater than what you enter.
Link Spy
Choose the linkname that will act as the linkspy. If activity is
detected, it will show a variety of information in the table below.
Note: To use this feature, put some links on your page that are
invisible with CSS StyleSheet. This makes it physically unclickable
to a surfer. When activity is detected, you KNOW it is a simulated
click by a hitbotter.
Groups
Group # - Number of the group to be used in out.cgi.
Skim Percentage - Percentage of clicks you want to send to galleries.
Clicks to Galleries - Number of clicks to send to gallery before
skimming.
Optional Description - Personal notes about the group.
Settings - Choose which trades will have priority over this group.
Note: Prioriotizing trades in groups only ensures these trades receive
first. After the surfer has visited all priority trades, they will
be sent to your other trades to ensure a good "unique out"
ratio.
Toplists
DO NOT ENTER TOPLIST INFORMATION IF YOU DO NOT HAVE TRADES *KNOWN BUG*
Source File Path - Path to the file containing codes that will get
replaced.
Output File Path - Path to the file that will be overwritten each
minute.
Sorting - Determines the order in which they will rank.
Publish Toplists - Updates toplists immediately.
Note: The paths you set will be red if the file is not found. Also
note that if you specify a wrong directory, it will seem to halt
for a few seconds before showing you that the path doesn't exist.
Codes:
%%URL_#%% - Return URL of the ranked trade.
%%TMB_#%% - Thumbnail URL of the ranked trade.
%%IN_#%% - Number of Hits In of the ranked trade.
%%UNI_#%% - Number of Uniques In of the ranked trade.
%%TIT_#%% - Title of the ranked trade.
%%ID_#%% - ID of the ranked trade.
%%OUT_#%% - Number of Hits Out of the ranked trade.
%%CL_#%% - Number of Clicks of the ranked trade.
%%TCL_#%% - Number of Trade Clicks of the ranked trade.
%%DSC_#%% - Description of the ranked trade.
Note: Do not use any leading 0's in the code numbers. Ranks start
at 1, not 0.
Example: %%URL_1%%, %%TIT_11%%, %%IN_111%%.
Interface Editing
a:active, a:link, a:visited, a:hover - Text.
body - HTML body.
tr - Table rows.
td - Table columns.
title1 - Script Logo (top part of top logo).
title2 - Script Logo (bottom part of top logo).
select - Drop down menus.
table - Tables.
header - Top rows of tables.
footer - Bottom rows of tables.
row1 - Middle rows of tables.
row2 - Middle rows of tables.
form - Buttons, text inputs, etc.
checkbox - Checkboxes in the admin.
graph1 - Top left graphs.
graph2 - Top right graphs.
graph3 - Middle left graphs.
graph4 - Middle right graphs.
graph5 - Bottom left graphs.
graph6 - Bottom right graphs.
yearlygraph1 - Top left graphs in yearly history.
yearlygraph2 - Top right graphs in yearly history.
yearlygraph3 - Middle left graphs in yearly history.
yearlygraph4 - Middle right graphs in yearly history.
yearlygraph5 - Bottom left graphs in yearly history.
yearlygraph6 - Bottom right graphs in yearly history.
Note: If you've messed up your style and want the original, it is
hard-coded in the admin area BEFORE you login. Just get everything
in between <style></style> EXCLUDED. The style file
must have the style lines only.
IP Locater
Enter an IP to locate its origin.
Access Log
Logs of attempts to enter your copy of SwiftClicks.
Note: When trying to clear the log, it is normal to have 10 lines
left to prevent possible hackers to delete their own IP from the
logs.
Error Log
Errors that might happen in your SwiftClicks copy.
Note: Some errors can be just a user playing with some fields he
shouldn't be playing with..
Ex: "out.cgi - Group set is not specified" could be a
user just changing the "g=1" to "g=9".
In any case, you have an out-error URL and skim to take care of
those kinds of errors.
Settings
Secret Question - Question asked at login (Extra security).
Secret Answer - Answer to the secret question.
Activate Bouncer - The Bouncer will disable trade under the limit.
Bouncer Limit - Trades that send less than this amount within 24
hours get deactivated.
Admin Default - Overview you want to see after logging in.
Activate Watcher - Sends email when the Link Spy has detected new
activity.
Path to Sendmail - Usually "/usr/sbin/sendmail". Ask your
host if unsure.
Your Email - Where to send notifications etc..
Watcher Email - Recommended Email: "watcher@yourdomain.com".
Out Error Skim % - Skim when an error occurs in out.cgi.
Out Error URL - URL to send to when an error occurs in out.cgi.
Return System - Where to send surfers after they have visited all
your trades.
NoCookies - Choose whether to send it to a specific url, skim, or
always to gallery.
NoReferrers - Choose whether to treat normally or specify a different
skim.
SearchEngines - Choose whether to treat normally or specify a different
skim.
Note: Make sure to test the watcher settings after entering the
information using the email form at the bottom. |
